We still ended up with about 2 degrees of incorrect drive shaft match.  So we had to go back and cut more out of the tunnel.  We are using the spacer on the transmission mount that is over 1.5 inches high!  Now we have finally achieved nearly zero degrees.  Even my custom auto sound radio no longer fits.  I will be looking at a "Secret Radio" that I will install horizontally in the console - more on that later.  Notice the shifter handle has also been shortened.  The console plate will be milled out in the shifter area so that the shifter boot can be raised.  We had to buy more front carpet so that it would be long enough to cover an elevated tunnel.